[NY_Yankees_Fan]

Keith,

Here you go, hope this helps, if not let me know.

The aluminum strip is 2 inches wide I bent it in a vice.

I have added a few pictures from different views

The motor is just a window motor, does not matter from what car as long as it has a gear on the end. I went on e-bay, typed in window motor and got the cheapest I could find, just so happen the 4 were cheaper then one! My first thought was to JB weld a nut onto the gear. Then I gave it more thought and found if I trimmed the points on the gear a bit, I could get a socket to fit. I then used an old socket extension to connect the socket to the wire screw gear.