TractorByNet.com - View Single Post

dfkrug · 02-26-2007, 09:37 PM

That could work. It would be better than a standard 3-pt hitch
with the exception of the toplink. All the upper stresses would
still be on one point.

I do think you could make a good attachment out of this "quick
hitch" if you weld it on and provide TWO attachment points at the
top for the hoe, and support the top of the "quick hitch" at more
than just the toplink bracket on the tractor.

02-26-2007, 09:37 PM	#16 (permalink)
dfkrug Veteran Member Join Date: Feb 2004 Location: NorCal Posts: 2,402	Re: yet another custom backhoe subframe That could work. It would be better than a standard 3-pt hitch with the exception of the toplink. All the upper stresses would still be on one point. I do think you could make a good attachment out of this "quick hitch" if you weld it on and provide TWO attachment points at the top for the hoe, and support the top of the "quick hitch" at more than just the toplink bracket on the tractor. __________________ See my TBN projects at: http://mysite.verizon.net/resyfcgt/ Kubota B21 rebuild 1 cy FEL bucket custom b/h thumb custom b/h subframe Diesel fuel dispenser Bucket dentistry custom hydraulic b/h thumb adapting a 4-in-1 bkt to my Kioti JD 4300 rebuild (new!)