Quote:
|
Originally Posted by 7864
Wheel spacers make a huge difference. I have used a 4310 with 6" spacers on each side(tractor belongs to a family member)He had them custom made.Special fine thread bolts were required if I recall. This is not a project for most DIYers. You want them to be made correctly and installed correctly.Use loctite on all the fasteners and check them often.Failure could be disasterous.
|
Yep on the loctight as I do not want them coming off. If I do it, I will go with Unverferth as they will seel you ll the hardware required, and they have a set made for the 4310.
They do cost almost $700 a pair though.
