Quote:
|
Originally Posted by dfkrug Hey Lucas....
I missed your B21 thread the first time around, but I read it all as soon as
MACHMETER pointed it out. I am glad nothing has broken since.
It is true that there were some assembly order issues for me as I did not
take the tractor apart first. I had some trouble with the HST pedal spring,
but not the one you had. I had to fabricate the part on the HST casting
as it was one of my missing parts. I DID make the mistake of putting the
2 halves of the tractor together before attaching the top hyd hard line to the
charge pump. This would not have happened if I had taken the tractor
apart myself.
Were your ROPS/ FOPS support bolts on the rear axle as bad as mine? |
Dave,
My
ROPS bolts were tough to get off due to their location and penchant for attracting dirt. But they didn't have 10% of the corrosion I saw in your picture, good move replacing them.
Kubota has a dist'y center in Stockton so when you run short on parts you can will-call or have them drop shipped pretty quick.
-Lucas