View Single Post
Old 01-03-2008, 03:26 PM   #38 (permalink)
dfkrug
Veteran Member
 
dfkrug's Avatar
 
Join Date: Feb 2004
Location: NorCal
Posts: 2,404
Default Re: Kubota B21 TLB complete driveline rebuild

Quote:
Originally Posted by yubby
I believe they include the bucket, I have lifted 900 lb pallets of cultured stone off my flatbed (on the ends of bucket forks). Also figure 1/3 cu yd capacity bucket mounded with dirt =~ 1000 lbs. I would say your 4in1 shaves off a couple hundred pounds but it looks good doing it ;-)
I shoulda weighed the FEL before I mounted it. The manual does not say if
the 650# weight is with or without the bkt, as I recall. At this point I have
not re-mounted the 4n1 bkt yet. I just finished draining old hyd fluid from
the FEL. The TL421's lifting capacity at the bottom is probably 200# or so
more than its 926# limit at the top.
__________________
See my TBN projects at:
http://mysite.verizon.net/resyfcgt/
Kubota B21 rebuild
1 cy FEL bucket
custom b/h thumb
custom b/h subframe
Diesel fuel dispenser
Bucket dentistry
custom hydraulic b/h thumb
adapting a 4-in-1 bkt to my Kioti
JD 4300 rebuild (new!)
dfkrug is online now   Reply With Quote
 
Page generated in 0.09194 seconds with 8 queries