As the arrival of the 2720 is "officially" coming soon, I thought I'd post the specs here so all the usual this vs. that, orange vs. green, and what still no 3 range! can commence.
Engine
Manufacturer Yanmar
Model Number 3TNV88-BMJK
Type Diesel
Gross Horsepower 22.7 kW (30.5 hp)
PTO Horsepower 17.5 kW (23.5 hp)
Cylinders Three
Rated Engine Speed 2500 rpm
Operating Range 1000 - 2650rpm
Cooling Type Liquid
Oil Filter Standard Single Element
Air Cleaner Dry Type, Two Stage
Drivetrain
Type 2 Range Hydrostatic
Number of Speeds Infinite
Mechanical Front Wheel Drive (MFWD) Standard
MFWD Capability All Ranges
MFWD Engagement On The Go
Final Drive Spur Gear
Rear Axle Maximum Load 1100 kg (2426 lb)
Front Axle Maximum Load 880 kg (1940 lb)
Electrical System
Type 12 Volt
Battery Size 500 Cold Cranking Amps @ -18?C (0?F)
Alternator 40 amp
Front Wheels and Tires
Standard 24x8.5-14 R3
Optional 23x8.5-12 R4
Rear Wheels and Tires
Standard 36x14.00-15 R3
Optional 14-17.5 R4
Front Tire Inflation Pressures (Maximum)
24x8.5-14 R3 152 kPa (22 psi)
23x8.5-12 R4 241 kPa (35 psi)
Rear Tire Inflation Pressures (Maximum)
36x14.00-15 R3 138 kPa (20 psi)
14-17.5 R4 207 kPa (30 psi)
Tire Loads
NOTE: Maximum load capacity for single tire.
Front (23x8.5-12 R4 6PR) 303 kg (667 lb)
Front (24x8.5-14 R3 4PR) 171 kg (558 lb)
Rear (14-17.5 R4 6PR) 991 kg (2185 lb)
Rear (36x14.00-15 R3 4PR) 535 kg (1179 lb)
Fluid Capacities
Fuel Tank 27 L (7.1 gal)
Cooling System 3.9 L (4 qt)
Crankcase with Filter 3.6 L (3.9 qt)
Transmission and Hydraulic System 14.6 L (3.9 gal)
Front Axle 3.4 L (3.6 qt)
Ground Speeds
NOTE: All ground speed calculations shown are with machine equipped with standard tires and operated at 2600 engine rpm.
Forward and Reverse - Range High 0-20.9 km/h (0-13.0 mph)
Forward and Reverse - Range Low 0-7.2 km/h (0-4.5 mph)
Dimensions
NOTE: Machine equipped with standard tires.
Wheelbase 1655 mm (65.2 in.)
Overall Length with 3-point Hitch 2766 mm (108.9 in.)
Overall Width (Minimum) 1196 mm (47.1 in.)
Tread Width @ Centerline (Minimum)
Front (Only Wide Position Recommended) 830 mm (32.7 in.)
Rear (Only Wide Position Recommended) 954 mm (37.6 in.)
Height From Ground
To Top of Hood 1190 mm (47 in.)
To Top of ROPS 2279 mm (90 in.)
Ground Clearance
Front Axle 330 mm (13 in.)
Rear Axle Drawbar 280 mm (11 in.)
Turning Radius
With Brakes 2.3 m (7.5 ft)
Without Brakes 2.5 m (8.2 ft)
Weight
Machine equipped with a ROPS, 3-point hitch, standard tires and all fluids. 895 kg (1973 lb)
3-Point Hitch
Type Category 1
Lift Capacity-61 cm (24 in.) behind link arms 596 kg (1314 lb)
Lift Capacity-at link link ends 650 kg (1433 lb)