TractorByNet.com - View Single Post

MJPetersen · 03-28-2008, 05:31 PM

Thanks guys. I know that you are right about the braces--I actually had one for the verticle toplink mast, but did not like it so I took it out. I will add something there--at least a gusset.

Sorry for the not so nice pictures. I will try to do better with the next pics.

I have found that if you do not wire brush or use a flap disk on new steel it is hard to get paint to stick well.

Mike

03-28-2008, 05:31 PM	#5 (permalink)
MJPetersen Platinum Member Join Date: Feb 2007 Location: Warsaw, Poland Posts: 988	Re: Rear Blade build Thanks guys. I know that you are right about the braces--I actually had one for the verticle toplink mast, but did not like it so I took it out. I will add something there--at least a gusset. Sorry for the not so nice pictures. I will try to do better with the next pics. I have found that if you do not wire brush or use a flap disk on new steel it is hard to get paint to stick well. Mike __________________ "In all your ways acknowledge Him and He will direct your paths." Solomon YM1510D, YM 1202 tiller, The following home made tools: Quick Hitch, KK copy dirt scoop, imitation Gannon rollover box blade, Forks on 3pt, and a Rear Blade with gauge wheels