Quote:
|
Originally Posted by Mech
Here is the part #:
AM875169 SHIM ***'Y, RELIEF 2.68 2.68 Stock
It is just a set of shims (washers) that goes on top of the compression spring of the relief valve to increase the pressure it kicks out at. I think it came with 5 shims and I put them all in. I think maybe some have put in two kits. You can search on that part number here to find some threads. If I put in two kits I would definitely put a pressure guage on it and make sure it wasn't getting too high. It wasn't too hard to put in but I don't remember what I had to take off to get to it. I think the shims came with instructions. It is hard to tell how much it helped because I put it in a few weeks after I got the tractor. It will lift as much as I'm comfortable carrying in the front bucket and runs the TNT, angle kit, and 3 pt just fine.
|
The shims go under the seat on the top of the assembly that connects to the "rate of drop" knob. There are two nuts and I think the shims go under the nut on the left when looking from the front of the tractor.