TractorByNet.com - View Single Post - JD 850 Hydaulic add on for Ag. implements?

zzvyb6 · 04-07-2008, 04:50 PM

On my JD-1070 (bigger brother to your 850), I have quick disconnects for use when removing the loader for field work. All I do is run hose extensions from the haybine cylinders (2-way for tongue swing and 1-way for header lift). Snap them into the loader connectors and voila ! That's all there is to it. If you don't want to remove the loader, just unplug the pressure side of the bucket hose and run your 1-way cylinder.

04-07-2008, 04:50 PM	#3 (permalink)
zzvyb6 Platinum Member Join Date: Dec 2006 Location: michigan Posts: 685	Re: JD 850 Hydaulic add on for Ag. implements? On my JD-1070 (bigger brother to your 850), I have quick disconnects for use when removing the loader for field work. All I do is run hose extensions from the haybine cylinders (2-way for tongue swing and 1-way for header lift). Snap them into the loader connectors and voila ! That's all there is to it. If you don't want to remove the loader, just unplug the pressure side of the bucket hose and run your 1-way cylinder. Attached Thumbnails __________________ There is no "I" in team, but there is a "Me" if you want to jumble it up a bit...