Here are a bunch of pics that I took of the underside. Found a 7/8"-1" stick shoved up from the bottom all the way up by the sheet metal for the cowl.
Does not appear to have caused any damage.
The sub frame is made from 2 1/2" square tubing and each tube has a factory bend in it. My cross brace is bent and the drive shaft cover above it is bent up about 3/4". (maybe .090 thick, but I doubt it) And I saw that somewhere apparently I was deep enough in mud that my filters got drug through the muck.
All the more reason to get my skid plate made.
