TractorByNet.com - View Single Post - Quick FEL question

texasjohn · 04-24-2008, 10:24 AM

Cost of toothbar varies by size and weight (pounds).. ballpark is $350...
You can install yourself if you are tool handy. Numerous posts on TBN discuss how people did it, with photos. This is a good opportunity for you to try the TBN search engine.

Drill holes in side of bucket, insert bolts, tighten. Hopefully you could see one installed...easy to understand once you see it. My John Deer toothbar is probably the heaviest I have heard about... 136lbs ... I had to use some washers as shims to close the .5 inch gap between the toothbar tabs and the bucket sides.

Get one, you won't be sorry.

04-24-2008, 10:24 AM	#8 (permalink)
texasjohn Veteran Member Join Date: Oct 2005 Location: Central Texas, Jarrell Posts: 1,638	Re: Quick FEL question - Teeth or no teeth? Cost of toothbar varies by size and weight (pounds).. ballpark is $350... You can install yourself if you are tool handy. Numerous posts on TBN discuss how people did it, with photos. This is a good opportunity for you to try the TBN search engine. Drill holes in side of bucket, insert bolts, tighten. Hopefully you could see one installed...easy to understand once you see it. My John Deer toothbar is probably the heaviest I have heard about... 136lbs ... I had to use some washers as shims to close the .5 inch gap between the toothbar tabs and the bucket sides. Get one, you won't be sorry. __________________ Joy is having the tools you need and needing the tools you have! Kubota 5030 HSTC, BB, Danhueser PHD, LA853 QA HD FEL w JD toothbar, 3pt chisel, 3 pt disk, 6' shredder, Kubota FEL hay spike, 3pt hay fork w carryall