Quote:
|
Originally Posted by rback33
That is well and true probably, ( I did not proof it), but that only tells you the forces at that point, not at the pivot pin of the loader or any other point in space.
|
Good point.
The OP asked about the cylinder though and what kind of capacity increase he could expect. The geometry of most FEL's are different enough that a blanket statement can't be applied to the entire loader system (mechanical and hydraulic).
If you don't change the geometry of the loader linkage then bumping the cylinder bore up a level should yield a pretty linear increase relative to the original specs.
Levers and fulcrums, that's all it is.