TractorByNet.com - View Single Post

asylum · 05-05-2008, 02:29 PM

Guess that answers it. I will try to get some good pictures and put them up, but at least it sounds like the oil is coming from the crankcase.

As for hydraulic oil for the tranny, I found F-134 is what I should use. I'm a little low on the dipstick (bottom of stick). I am going to get a gallon and add it to the tranny. Hoping one gallon will do it. The previous owners had the tractor for 4-5 years and never changed the hydraulic fluid. It still looks clean so I am going to add oil to it rather than changing out 5 gallons. Might just change the filter.

Bob

05-05-2008, 02:29 PM	#16 (permalink)
asylum Member Join Date: Apr 2008 Posts: 45	Re: Ford 1710 Injector Pump oil Problems Guess that answers it. I will try to get some good pictures and put them up, but at least it sounds like the oil is coming from the crankcase. As for hydraulic oil for the tranny, I found F-134 is what I should use. I'm a little low on the dipstick (bottom of stick). I am going to get a gallon and add it to the tranny. Hoping one gallon will do it. The previous owners had the tractor for 4-5 years and never changed the hydraulic fluid. It still looks clean so I am going to add oil to it rather than changing out 5 gallons. Might just change the filter. Bob