Re: Welding on hydraulic cylinder rod eyelet
Extend it all the way out, wrap the rod with a wet rag (as has been stated) [make sure to cover all the rod that travels into the cylinder], grind out the "crack" and weld it with stick or Mig your call. Tig is not necessary. That part is not so important if the welder has enough power to weld the heavy material.
Mike
__________________
"In all your ways acknowledge Him and He will direct your paths" Solomon
YM1510D, YM 1202 tiller, KK copy dirt scoop, imitation Gannon rollover box blade, and a Rear Blade with gauge wheels
|