Quote:
|
Originally Posted by mono
When I am in low gear (HST), my travel is much slower than forward. Same for the hi range, but not as bad. Any ideas?
Thanks.
|
make sure your hst peddle is not bent, mine was, although mine is a ck-25, and i dont have any knowledge of the ck-20,i cant imagine the hst peddle being any different.
my machine was moving slower in reverse,and highbeam hooked me up on this fix,the peddle is very easy to bend by hand,so it wouldnt take much to bend it.
i just looked under the floorboard at the actuator,and pushed the peddle in reverse to the floorboard,and then forward to the floor,(while the tractor is not running)and watched the distance it traveled in each direction.mine wasnt traveling the full range in reverse,so i put a piece of wood under the front of the peddle and pulled up on the rear of it until it bent a little,and checked it again,problem solved.
if you do a search you can find my original thread where highbeam and others wrote in on this fix, try typeing in slower in reverse,and see what comes up...............chris