TractorByNet.com - View Single Post

dfkrug · 05-11-2008, 11:23 PM

I don't know the NH tach/hr meter, but I had 2 of the combo guages
go bad on my Deeres. I took apart the guages just to see what the
failure mode was and the plastic worm gears for the counter had stripped
out. I had to peel back the metal edges of the guage to get it open.
A new guage was not excessively high, as I recall: $55?

Maybe Yanmar and Shibaura use the same supplier?

05-11-2008, 11:23 PM	#2 (permalink)
dfkrug Veteran Member Join Date: Feb 2004 Location: NorCal Posts: 1,550	Re: Ford/NH 1715 Hour Meter I don't know the NH tach/hr meter, but I had 2 of the combo guages go bad on my Deeres. I took apart the guages just to see what the failure mode was and the plastic worm gears for the counter had stripped out. I had to peel back the metal edges of the guage to get it open. A new guage was not excessively high, as I recall: $55? Maybe Yanmar and Shibaura use the same supplier? __________________ See my TBN projects at: http://hometown.aol.com/dkrug/page1.html Kubota B21 rebuild 1 cy FEL bucket custom b/h thumb custom b/h subframe Diesel fuel dispenser Bucket dentistry custom hydraulic b/h thumb