View Single Post
Old 05-13-2008, 01:13 AM   #17 (permalink)
mjncad
Platinum Member
 
mjncad's Avatar
 
Join Date: Aug 2006
Location: Front Range of Colorado
Posts: 864
Default Re: Custom built gooseneck

Quote:
Originally Posted by Compact1
What idea did Redbug incorporate on his gooseneck? I must have missed that thread...I'll try searching for it.
Redbug's is a bumper pull; but it's part dump trailer too. He made removable sides for it that allow the rear 1/3 - 1/2 from what I could see to be used as a dump trailer. Otherwise it's an equipment hauler. Pretty slick setup.
__________________
Measure it with a micrometer, mark it with chalk, cut it with a torch, beat to fit, paint to match, inspect it with a microscope.

Added sprayer modifications gallery. 07/06/2008
http://picasaweb.google.com/mjncad/FIMCOSprayer

Added second camera to Lights, Camera, ACTION! & Thumper needs new teeth to John Deere L130 galleries. 06/11/2008
http://picasaweb.google.com/mjncad/LightsCameraACTION
http://picasaweb.google.com/mjncad/JohnDeereL130Misc

http://picasaweb.google.com/mjncad
mjncad is offline   Reply With Quote