Re: Bench grinder or angle grinder?
Which do want to do, just make it fit, or make it fit and look like it was made to fit?
If all you care for is getting it in there then go with the angle grinder and have at it, it will allso go alot faster getting the grinding done.
If your OCD would require you to make it look factory flat like mine does, then go with the bench grinder. Use the side of the wheel. Put a reference mark on the side you will not be grinding, put it flat to the side of the wheel for 3 or 4 seconds then rotate the swivel 180 degrees and grind for the same amount of time. Do the other side the same way and it should come out flat and pretty. Good Luck.
|