TractorByNet.com - View Single Post

dfkrug · 05-14-2008, 01:59 PM

You may have an auto return valve there. This is the kind you see on
hyd log splitters where the lever goes into detent until the cyl connected
to the work ports reaches the end of its travel and hyd pressure causes
the lever to spring back to neutral.

I have not seen that kind of valve used as a rear AUX valve on a tractor,
but it sure is possible. Can you try the other valve?

05-14-2008, 01:59 PM	#2 (permalink)
dfkrug Veteran Member Join Date: Feb 2004 Location: NorCal Posts: 1,552	Re: Detent valve use You may have an auto return valve there. This is the kind you see on hyd log splitters where the lever goes into detent until the cyl connected to the work ports reaches the end of its travel and hyd pressure causes the lever to spring back to neutral. I have not seen that kind of valve used as a rear AUX valve on a tractor, but it sure is possible. Can you try the other valve? __________________ See my TBN projects at: http://hometown.aol.com/dkrug/page1.html Kubota B21 rebuild 1 cy FEL bucket custom b/h thumb custom b/h subframe Diesel fuel dispenser Bucket dentistry custom hydraulic b/h thumb