[slipshot77]

I'll try to explain how to set your plows. Mount your plows and find a good level place to preferably on concrete. With ramps and blocks raise the right side of the tractor up the depth you want to plow. If you want to plow 8 inches deep the use 8 inch blocks. Let your lift down to where the plows are just an inch or so off the ground. Now you want to level the plows side to side by adjusting the tilt bar. After you get the side to side level adjust the third arm till you get the plows level from front to back. When you get everything set right, Let your lift down and the plows should be setting level on the ground. This will get you really close when you go back out in the field. A little tweaking might be needed but you should still be able to plow.
Option: B Go buy one of those cheap middle busters like TSC and other places sell and drag that through your ground. It won't be pretty but it will get you by. A disk will smooth it out afterwards.