Quote:
|
Originally Posted by jinjimbob
I used the reverse tiller today on soil that had never been tilled.
It only too 10 minutes to jam it, with a small section of branch, 5 inches thick, 2 foot long. The clutch slipped for a second and before I had chance to do anything, the engine died. I will see how to get that branch out in a day or so.
Question, when tilling with a Kubota B2320, what position should the rear pto lower/raise lever be in, the middle or at the bottom? If I have it at the middle, the tiller raises up. Just learning the ropes. |
23HP is that engine or
PTO?
Also, never ever tilled soil...you might want to take it a little slower...like start with a proposed depth of 4 inches and then go back for another pass...
