TractorByNet.com - View Single Post - TC33-DA Hydraulic Hose/Filter Question

RickB · 05-17-2008, 06:06 AM

The 90 degree oil cooler hoses on tractors below serial number G105215 have been problematic for some time. One good solution is to replace the steel tubes running from the filter and cooler bypass valve to the cooler with the newer style tube that uses straight jumper hoses to connect to the cooler. Parts for this conversion should run about $100. To WCH; these are low pressure hoses connected with common hose clamps. A change to 90 degree molded hoses has resulted in multiple headaches, especially at cold startup in northern climates.

05-17-2008, 06:06 AM	#4 (permalink)
RickB Veteran Member Join Date: Sep 2000 Location: Eastern NY Posts: 1,407	Re: TC33-DA Hydraulic Hose/Filter Question The 90 degree oil cooler hoses on tractors below serial number G105215 have been problematic for some time. One good solution is to replace the steel tubes running from the filter and cooler bypass valve to the cooler with the newer style tube that uses straight jumper hoses to connect to the cooler. Parts for this conversion should run about $100. To WCH; these are low pressure hoses connected with common hose clamps. A change to 90 degree molded hoses has resulted in multiple headaches, especially at cold startup in northern climates.