TractorByNet.com - View Single Post

Gilroylee · 06-06-2008, 05:56 AM

Picked tractor up from dealer today. Mechanic adjusted inching cable but measured cable movement at hydraulic valve after removing dash cover on port side of tractor. The owner's manual lists this adjustment last in a series of instructions. Inching pedal feels like it did when tractor was new. Hope it lasts. Read all the posts about EHSS problems on TC55DA. Had a 2120 before. Same tractor and transmission as far as I can tell but the 2120 went 1500 hours before any of these types of problems showed up.

06-06-2008, 05:56 AM	#3 (permalink)
Gilroylee New Member Join Date: Nov 2006 Posts: 2	Re: EHSS Inching Pedal Adjust Picked tractor up from dealer today. Mechanic adjusted inching cable but measured cable movement at hydraulic valve after removing dash cover on port side of tractor. The owner's manual lists this adjustment last in a series of instructions. Inching pedal feels like it did when tractor was new. Hope it lasts. Read all the posts about EHSS problems on TC55DA. Had a 2120 before. Same tractor and transmission as far as I can tell but the 2120 went 1500 hours before any of these types of problems showed up.