TractorByNet.com - View Single Post

CJ4 · 06-06-2008, 04:02 PM

Gilroylee,

I just replaced my inching pedal cable and my service manual says to adjust it just like you said your dealer did. You have to remove that left cover to see the movement at the EHSS control valve. The book says to adjust it to 2mm of play. Boy, my eyes are old and 2mm isn't much movement!!! I'm not sure how you could get anything in there to accurately measure it anyway. Anyone have a suggestion??? I just adjusted mine visually and guessed that 2mm was just enough for me to see it move a bit.

06-06-2008, 04:02 PM	#4 (permalink)
CJ4 Gold Member Join Date: Oct 2005 Location: Okla City, Oklahoma Posts: 268	Re: EHSS Inching Pedal Adjust Gilroylee, I just replaced my inching pedal cable and my service manual says to adjust it just like you said your dealer did. You have to remove that left cover to see the movement at the EHSS control valve. The book says to adjust it to 2mm of play. Boy, my eyes are old and 2mm isn't much movement!!! I'm not sure how you could get anything in there to accurately measure it anyway. Anyone have a suggestion??? I just adjusted mine visually and guessed that 2mm was just enough for me to see it move a bit. __________________ NH TC55DA, EHSS, 4wd, 18LA FEL, Woods BH-90X BH, Toothbar, Forks, 3 Rear Remotes, Hyd Top Bar, 5' Rhino brush hog, Grapple, 6' Tiller.