TractorByNet.com - View Single Post - How To Put Cab / Flasher Lights ON Designated Switch

nmu98 · 12-02-2008, 08:09 AM

I finished putting the switch in. It was lighted so I had to grab a ground from the beacon wiring (the black wire). I have tested out moving around all the wires on the factory switch and had no issues at all. It is normal, but odd that the dash lights do not come on with the worklights (with the key off).

I will try to grab some pictures, but I was in a hurry to get this done as I think I have some hydro issues....

12-02-2008, 08:09 AM	#37 (permalink)
nmu98 Platinum Member Join Date: Jun 2007 Posts: 891	Re: How To Put Cab / Flasher Lights ON Designated Switch I finished putting the switch in. It was lighted so I had to grab a ground from the beacon wiring (the black wire). I have tested out moving around all the wires on the factory switch and had no issues at all. It is normal, but odd that the dash lights do not come on with the worklights (with the key off). I will try to grab some pictures, but I was in a hurry to get this done as I think I have some hydro issues.... __________________ JD 5203 2wd, JD 3720 cab, JD 4110, JD 445, IH 1586, IH 886, IH 404......