Quote:
Originally Posted by ray66v  I have cut them flush with the ground, and ran a large lag screw into the wood with an impact wrench. Then, I put a chain with a 2 fingered hook over the head of the lag bolt, laid some boards out, and used a bumper jack to pop them right out. |
After hurricane Ike alot of my privacy fences treated 4x4's where snapped off right at the ground. I ran a large lag bolt with a washer through a end link of a chain using a 1/2 drive impact ran the lag bolt into the broken 4x4,then hooked to the hooks on the
FEL. Pulled the broken post and concrete up easily and I had strainght clean holes to reset the new 4x4's in
