Got all the 50hr done myself except having issues with the
hyd filter-external and the internal suction screen with the magnets.
1)The external filter has a gasket on it, and there is a gasket on the metal transmission case. When you thread the filter on, the gasket that is on the metal transmission case moves and slides up down and sideways so it doesnt line up exactly with the filter seal, thus, leaks. Any tricks? I have used fluid on the tranny seal to hold it but no luck.
2) How are the magnets supposed to line up in the suction screen internal filter/. Any special way or do you just set them in there making sure the end of the magnets go completly inside the lip of the screen filter?
3) I cannot see all the way inside(due to access issues) the tranny case to set the screen filter in. How far back into the tranny case does the suction filter go back in there? It appears that the last quarter of the filter sticks out and the suction screen cover goes around it and over it--is this correct?
if anyone wants to email me direct
tcasamr@aol.com
Thank you