TractorByNet.com - View Single Post

LBrown59 · 01-01-2009, 12:12 PM

My burning barrel sets on end on top of the 2 metal bars spanning the cement blocks.
The bars pictured are 1&1/4Th inch aluminum C channel spanning a 54 inch gap.
I had to replace them because they were not stout enough to support the barrel.
I replaced them with 3/4 inch steel pipe but the pipe is starting to bend and sag too.
What can I use in place of the pipe that won't do that?

01-01-2009, 12:12 PM	#24 (permalink)
LBrown59 Super Star Member Join Date: Oct 2004 Location: First organized permanent settlement in the northwest territory Posts: 14,365	Re: BURN BARREL BASE My burning barrel sets on end on top of the 2 metal bars spanning the cement blocks. The bars pictured are 1&1/4Th inch aluminum C channel spanning a 54 inch gap. I had to replace them because they were not stout enough to support the barrel. I replaced them with 3/4 inch steel pipe but the pipe is starting to bend and sag too. What can I use in place of the pipe that won't do that? __________________ Tractors 2003 Kubota BX1500/2004 Kubota Bx23/New- Kubota BX1500 Attachments 60'' Front Blade/48'' Rear Tiller/FEL/Back Hoe / 60'' MMM/Clamp on Forks/48'' MMM South of Canton Ohio L . B