TractorByNet.com - View Single Post

SnowRidge · 01-04-2009, 09:52 AM

Mith, there are several different motors on the various PT mowers. Not too long ago I did all the research necessary to replace the deck mounted motor on my PT-425's brush cutter. It wasn't easy, as Power Trac often deliberately obliterates the motor data plate. I'm on the road at the moment, so I don't have access to the motor information, but it is roughly 50cc.

Can you tell us the max flow and pressures of your system? That way the folks with equivalent or close PTs can respond.

01-04-2009, 09:52 AM	#2 (permalink)
SnowRidge Elite Member Join Date: Jul 2003 Location: East Tennessee Posts: 3,092	Re: Mower deck hydraulic motor. Mith, there are several different motors on the various PT mowers. Not too long ago I did all the research necessary to replace the deck mounted motor on my PT-425's brush cutter. It wasn't easy, as Power Trac often deliberately obliterates the motor data plate. I'm on the road at the moment, so I don't have access to the motor information, but it is roughly 50cc. Can you tell us the max flow and pressures of your system? That way the folks with equivalent or close PTs can respond.