TractorByNet.com - View Single Post

Dargo · 04-19-2009, 09:42 AM

Gemini, if you were familiar with the 70 (most call them 70 1/2), you'd know that there are two bolts at the top of the bell housing next to the firewall that are nearly impossible to reach from either under the car or from the top. If you removed the front wheels you could reach through the wheel well and openings in the inner fender and get to the bolts easier. There are several tricks to working on those old partial frame vehicles. My '69 Z28 Camaro was the not quite the same since it came with a 302ci engine rather than a 350. How many 302ci GM engines have you seen?

04-19-2009, 09:42 AM	#524 (permalink)
Dargo Elite Member Join Date: Mar 2004 Location: S. IN Posts: 4,656	Re: Harbor Freight Tools that don't suck Gemini, if you were familiar with the 70 (most call them 70 1/2), you'd know that there are two bolts at the top of the bell housing next to the firewall that are nearly impossible to reach from either under the car or from the top. If you removed the front wheels you could reach through the wheel well and openings in the inner fender and get to the bolts easier. There are several tricks to working on those old partial frame vehicles. My '69 Z28 Camaro was the not quite the same since it came with a 302ci engine rather than a 350. How many 302ci GM engines have you seen? __________________ 1982 19" Murray push mower (B&S industrial 8 hp engine!) custom deck, 6" plastic wheels with grade 2 1/2" bolts with 1" washers! Weed Eater 25cc string trimmer. Rural King .95 star shaped ORANGE string! 1978 Ford pickup, stick shift, 300ci 6 cyl, a rear end, splined axles, Steel U joints, cab bolts from Lowes, 2 factory hubcaps on rusted STEEL wheels! 2006 Harbor Freight claw hammer, made from real recycled steel! $1.99 HF multimeter, quality components from many exotic locations!