TractorByNet.com - View Single Post - Looking for adjustable link for 3pt hitch on 790

kebo · 06-11-2009, 07:25 AM

Oh, the 790 has an adjustable link. You just have to loosen the nut on either end of the middle section, turn it by hand t oadjust, and then tighten them back up. But, you pretty much have to get off the tractor to do that. I'm looking for one with a crank handle that I (hopefully) can reach from the operator seat and adjust the height by cranking it up or down. I guess you call it the poor man's top and tilt.

Does your 4310 have the crank handle on it? If yes, can you adjust it from the operators seat????

06-11-2009, 07:25 AM	#3 (permalink)
kebo Platinum Member Join Date: May 2006 Location: Lexington, SC Posts: 549	Re: Looking for adjustable link for 3pt hitch on 790 Oh, the 790 has an adjustable link. You just have to loosen the nut on either end of the middle section, turn it by hand t oadjust, and then tighten them back up. But, you pretty much have to get off the tractor to do that. I'm looking for one with a crank handle that I (hopefully) can reach from the operator seat and adjust the height by cranking it up or down. I guess you call it the poor man's top and tilt. Does your 4310 have the crank handle on it? If yes, can you adjust it from the operators seat???? __________________ Nothing could be finer than riding my 790 in South Carolina!! 2001 John Deere 790 4x4 with Model 70 FEL, 5ft International World Agritech bush hog, 5ft Wallburg BB, 5ft Frontier disc harrow, A&B Eagle Line 30" scoop pan, Leinbach PHD with 9" & 12" augers, boom pole, custom built handy hitch, Pat's Easy Change. Nothing runs like a Deere, or smells like a John....