View Single Post
Old 06-24-2009, 01:16 AM   #14 (permalink)
mjncad
Veteran Member
 
mjncad's Avatar
 
Join Date: Aug 2006
Location: Front Range of Colorado
Posts: 2,165
Default Re: John Deere 4300 complete rebuild

Quote:
Originally Posted by dfkrug View Post
The hood armor is made by JD, but I can not find it in the parts book. There
are several "rental upgrade kits" that are not described, however. This
hood armor is awesome.....it must weigh at least 100 lb!

The new plastic is green all the way thru (ABS?) and not easily fixed when
broken. It replaced the earlier fiberglass hoods, which were aften smashed
but were easier to fix. I did a few on the 955s. The new plastics are
sourced from a plant in the US somewhere, according to the box the new
hood came it. I prefer sheet metal body parts, and I doubt the rental yard
will ever buy any tractor with plastic body panels again.
You'll find the hood armor parts on the JDparts web site under the 420, 430, & 460 loaders section.

The hoods and side panels are green all the way through while the fenders aren't. I believe they are all made of ABS; but I'm not sure.
__________________
Measure it with a micrometer, mark it with chalk, cut it with a torch, beat to fit, paint to match, inspect it with a microscope.

Google finally fixed Picasa web albums problems I was having. Latest postings.

http://picasaweb.google.com/mjncad/HydraulicsUpgrades#

http://picasaweb.google.com/mjncad/ToolsPower#
mjncad is offline   Reply With Quote
 
Page generated in 0.02300 seconds with 8 queries