View Single Post
Old 06-30-2009, 02:08 AM   #32 (permalink)
mjncad
Veteran Member
 
mjncad's Avatar
 
Join Date: Aug 2006
Location: Front Range of Colorado
Posts: 1,851
Default Re: John Deere 4300 complete rebuild

Quote:
Originally Posted by dfkrug View Post
I AM concerned about potential failure of the air hose. I warned the rental
yard about this problem and I think you should check it out, too. The drain
hose from the fuel filler catchment basin is pinched against the air hose and
I think you can reduce the risk of damage by removing this optional hose.
I hope other JD owners see this (incl 4x10 owners) and check it out.
Thanks for the tip on the air intake duct, I'll be sure to inspect mine even if I have to use a mirror or one of Rigid or Milwaukee's new reasonably priced snake-cams. Another excuse to buy a toy.
__________________
Measure it with a micrometer, mark it with chalk, cut it with a torch, beat to fit, paint to match, inspect it with a microscope.

Google finally fixed Picasa web albums problems I was having. Latest postings.

http://picasaweb.google.com/mjncad/HydraulicsUpgrades#

http://picasaweb.google.com/mjncad/ToolsPower#
mjncad is offline   Reply With Quote
 
Page generated in 0.08850 seconds with 8 queries