TractorByNet.com - View Single Post

CCWKen · 07-04-2009, 03:23 AM

Normally, there shouldn't be that much play in the needle assemby. You might try using a magnet against the face and see if you can get the needle back on the other side. Otherwise, new gauge time. Replace the gauge first and see if that fixes your register problem. If you need a gauge anyway, it's cheaper than a sender.

07-04-2009, 03:23 AM	#3 (permalink)
CCWKen Silver Member Join Date: Mar 2005 Location: South Texas, USA Posts: 225	Re: John Deere 4600 fuel guage problem Normally, there shouldn't be that much play in the needle assemby. You might try using a magnet against the face and see if you can get the needle back on the other side. Otherwise, new gauge time. Replace the gauge first and see if that fixes your register problem. If you need a gauge anyway, it's cheaper than a sender.