TractorByNet.com - View Single Post

kjms8968 · 07-04-2009, 09:18 PM

Hi,

Thanks for the reply. I should have been more clear. The problem starts actually on step 8B.

NOTE: Belt should not be under tension. If tension exists, repeat pulling of belt loop to release tension from POWER FLOW tension mechanism. Lever must be free to rest on blower housing.

The problem is that the belt *is* under tension and we cannot attach it to the second head of the sheave. The tension bar doesn't seem to do anything and there doesn't seem to be any way to release the tension.

Thoughts?

Thanks!

k.

07-04-2009, 09:18 PM	#3 (permalink)
kjms8968 New Member Join Date: Jul 2009 Posts: 2	Re: G100 Power FLow install question Hi, Thanks for the reply. I should have been more clear. The problem starts actually on step 8B. NOTE: Belt should not be under tension. If tension exists, repeat pulling of belt loop to release tension from POWER FLOW tension mechanism. Lever must be free to rest on blower housing. The problem is that the belt is under tension and we cannot attach it to the second head of the sheave. The tension bar doesn't seem to do anything and there doesn't seem to be any way to release the tension. Thoughts? Thanks! k.