TractorByNet.com - View Single Post

Carr73 · 07-05-2009, 02:50 PM

I removed the cover today and found the problem. On the left rear of the valve there is a pivot. The pivot or ball is threaded to a stud. This part had backed all the way out so the lever was now at the upper right. Tightenening this back down realigned the lever. I will loctite this piece before I use it again.

07-05-2009, 02:50 PM	#2 (permalink)
Carr73 New Member Join Date: Feb 2008 Location: Evans GA/ Aiken Co SC Posts: 12	Re: MAHINDRA 3215 bucket control valve? I removed the cover today and found the problem. On the left rear of the valve there is a pivot. The pivot or ball is threaded to a stud. This part had backed all the way out so the lever was now at the upper right. Tightenening this back down realigned the lever. I will loctite this piece before I use it again. __________________ Mahindra 3215 4WD