TractorByNet.com - View Single Post

kgiovann · 07-06-2009, 09:33 AM

JC - correction. Thickness on plates is less than 1/8 inch, not 1/4 as I stated earlier. I doubt even an adjustment will help but I'll give it a try.

07-06-2009, 09:33 AM	#19 (permalink)
kgiovann New Member Join Date: Jun 2009 Posts: 10	Re: Need advice on NH 1715 PTO Issue JC - correction. Thickness on plates is less than 1/8 inch, not 1/4 as I stated earlier. I doubt even an adjustment will help but I'll give it a try.