Thread: Snow 155D and a Snow blower
View Single Post
Old 10-24-2009, 07:41 PM   #4 (permalink)
arpt209
New Member
 
Join Date: Jan 2008
Posts: 1
Default Re: 155D and a Snow blower

I wanted to let you know that I run a YM 1510D with a 50" Farmking 3 point blower. I typically run it at 770 on the pto. In light fluffy snow I run the thing in 2nd range to feed enough snow in it to make a nice roostertail. I've never run out of power with my little 18 horse Yanmar. The only problem I've ever had is with drifted snow when it packs real hard, I'll have to use the loader to break off chunks to keep the blower from riding up over the drifts. If they're not packed in hard enough to drive on I can push my blower through snow over 4 feet deep using low gear. I get snow falling over the top of the blower as I undercut the drifts. I can actually move more snow quicker with this little outfit than I could with an 1155 Massey with a 7 foot bucket. This thing is slick & maneuverable.
I bought my blower 3 years ago new from a dealer for 1900$
arpt209 is offline   Reply With Quote
 
Page generated in 0.02232 seconds with 8 queries