TractorByNet.com - View Single Post

CHDinCT · 11-08-2009, 01:36 PM

jinman, don't have a box blade at this point nor any plans for one right now. There is no way any of my 3PH implements could hit the tires that I can see, but I could see where a BB with the scarifiers up front and pointing towards the tractor could be a problem.

My OEM top link is 14"-22". Couldn't match that so I went with 13"-19" which gave me an extra inch on the short side while sacrificing 3" on the long side. What would be nice is a 14" cylinder with an 8" stroke to match my OEM top link, but they just don't make one (that I can find) I now know I should have gone 15" -23" (IIRC - next size up had an 8" stroke). In a perfect world, I'd have both

but that ain't happening.

11-08-2009, 01:36 PM	#17 (permalink)
CHDinCT Platinum Member Join Date: Jul 2008 Location: Connecticut Posts: 581	Re: BX25 hydraulic top link jinman, don't have a box blade at this point nor any plans for one right now. There is no way any of my 3PH implements could hit the tires that I can see, but I could see where a BB with the scarifiers up front and pointing towards the tractor could be a problem. My OEM top link is 14"-22". Couldn't match that so I went with 13"-19" which gave me an extra inch on the short side while sacrificing 3" on the long side. What would be nice is a 14" cylinder with an 8" stroke to match my OEM top link, but they just don't make one (that I can find) I now know I should have gone 15" -23" (IIRC - next size up had an 8" stroke). In a perfect world, I'd have both but that ain't happening. __________________ Chris 2 acres and a mule, err, Kubota BX1860, FEL, 54"MMM, 5' FF Rake, DR PTO Chipper, 5' Woods RB, Powerhorse 3PH Splitter, 54" Front Blade 520-H Wheel Horse, 48" MMM, tiller, vac bagger Cyclone Rake, and more goodies.