TractorByNet.com - View Single Post - Pat's Easy Change System

Bob_Skurka · 01-26-2004, 05:07 PM

I would guess it would work without any problems, but I don't have the same model tractor you do so I am not positive.

My neighbor was over at my house yesterday, he was looking at some of the custom wiring I did on my tractor and noticed the Pat's Easy Change on my lower links and asked about them. He seemed very impressed and may be added them. He has a backhoe that he occasionally uses.

There is no real reason why it would not work unless you have a problem mounting the backhoe about 2.5" farther back from the tractor because the Pat's system pushes every implement you have back about that far. The biggest drawback is that with a really heavy implement (like a backhoe) you move the weight back another 2.5" which might make your front end a little light.

Assuming you use a subframe mount, then I don't think they would pose any problem either.

01-26-2004, 05:07 PM	#9 (permalink)
Bob_Skurka Super Member Join Date: Jul 2003 Posts: 7,505	Re: Pat\'s Easy Change System - Order Online! I would guess it would work without any problems, but I don't have the same model tractor you do so I am not positive. My neighbor was over at my house yesterday, he was looking at some of the custom wiring I did on my tractor and noticed the Pat's Easy Change on my lower links and asked about them. He seemed very impressed and may be added them. He has a backhoe that he occasionally uses. There is no real reason why it would not work unless you have a problem mounting the backhoe about 2.5" farther back from the tractor because the Pat's system pushes every implement you have back about that far. The biggest drawback is that with a really heavy implement (like a backhoe) you move the weight back another 2.5" which might make your front end a little light. Assuming you use a subframe mount, then I don't think they would pose any problem either.