<font color="blue">There is no real reason why it would not work unless you have a problem mounting the backhoe about 2.5" farther back from the tractor because the Pat's system pushes every implement you have back about that far. </font>
My
3PH backhoe on the B2910 Kubota has two tabs [for lack of a better word at the moment] that the ball end of the lower arm slips in between. There is a spacer that also goes in there, and then a pin is pushed through a hole in one tab, through the ball end and the spacer, and through a hole in the other tab...
Whether Pat's ends would work at all, with the
3PH backhoe, would depend on how wide they are. In my case I doubt they would make hooking up the backhoe any easier, and it would probably be more difficult getting them in between the tabs than it is to get the standard ball end in there, followed by the spacer.
AT least that is the way I remember it! [img]/forums/images/graemlins/blush.gif[/img] Been about four months since I set the hoe in the corner of the shed...