TractorByNet.com - View Single Post

scotd1 · 04-04-2001, 12:34 PM

I have a JD 5410 with FEL and mid mount hyd. hookups. I would like to add one or two more hyd. ports to operate a tip and tilt setup on the back. Going thru the dealer will cost $800 to $1000. Is there an easier/cheaper way?
I don't know much about these systems but it seems you could T off of the existing lines as they come out of the pump and run a line to a another valve. Am I off base?

Any tips or advise would be appreciated.

04-04-2001, 12:34 PM	#1 (permalink)
scotd1 Join Date: Apr 2001 Location: Nashville, Tennessee, USA Posts: 65	Adding Hyd. ports on JD I have a JD 5410 with FEL and mid mount hyd. hookups. I would like to add one or two more hyd. ports to operate a tip and tilt setup on the back. Going thru the dealer will cost $800 to $1000. Is there an easier/cheaper way? I don't know much about these systems but it seems you could T off of the existing lines as they come out of the pump and run a line to a another valve. Am I off base? Any tips or advise would be appreciated.