Results 1 to 2 of 2
07-25-2011, 10:58 AM #1
- Join Date
- Jul 2011
- Farmall 1206
New Holland 56 Hay Rake Tine Bar Bearing Help
Bearings went out on one of the tine bars on my 56 hay rake. Replace bearings but now I cant get the studs on the bearings to go back in the starwheel. Is there a trick to doing this? I tried leaving one side loose and getting the other end in and pushing on the bar in the center, all with no luck.
Any help is appreciated! Thanks
07-25-2011 10:58 AM # ADS
07-25-2011, 06:35 PM #2
- Join Date
- Sep 2000
- Eastern NY
- Case 885, JD 730D, Ford 4000
Re: New Holland 56 Hay Rake Tine Bar Bearing Help
Leave the bearings on both ends of the bar you are working on loose.
Loosen the 4 bearings on the 2 bars opposite the one you are working on.
Loosen the center hub of the RH star.
Put it together.If you can read this, thank a teacher.
If you are reading this in English, thank a veteran.
By steveky in forum Ag Tractors & MachineryReplies: 9Last Post: 07-05-2013, 10:14 PM
By Dave5264 in forum Owning/OperatingReplies: 24Last Post: 06-05-2011, 04:11 PM
By Ames12441 in forum Massey Ferguson Owning/OperatingReplies: 0Last Post: 05-02-2011, 01:22 PM
By Psb Houston in forum Ag Tractors & MachineryReplies: 0Last Post: 09-15-2009, 06:22 PM
By Chase in forum AttachmentsReplies: 9Last Post: 12-19-2005, 05:56 PM