New Holland 56 Hay Rake Tine Bar Bearing Help

[scottstein06]

Bearings went out on one of the tine bars on my 56 hay rake. Replace bearings but now I cant get the studs on the bearings to go back in the starwheel. Is there a trick to doing this? I tried leaving one side loose and getting the other end in and pushing on the bar in the center, all with no luck.
Any help is appreciated! Thanks

 

[RickB]

Leave the bearings on both ends of the bar you are working on loose.
Loosen the 4 bearings on the 2 bars opposite the one you are working on.
Loosen the center hub of the RH star.
Put it together.