Results 1 to 3 of 3
  1. #1
    Silver Member
    Join Date
    Oct 2006

    Default Pasquali tractor with post hole digger?

    What are the chances that using a PHD with my Pasquali articulated tractor will be a successful endeavor? The tractor is a relatively low machine. It has adequate power but is it too low or is there some other issue like stability?


  2. #2
    Gold Member
    Join Date
    May 2005
    West Kootenays, British Columbia
    Yanmar YM240D / Massey Ferguson 135 / New Holland TN75F / Pasquali 988 and 997 / Goldoni 20A, 226 and Maxter 70RS / Ferrari 76 and 85 / Holder A50 / Valpadana VMC 180 / Long 610 4WD

    Default Re: Pasquali tractor with post hole digger?

    Pasquali's are very stable, but that stability depends on the tire/rim package. Regardless, they are more stable than most standard tractors. The challenge will be the 3 pt. hitch lift limit. Some models are better than others because of the tires used. If you are using high weight implements, ensure the tires are out as wide as possible and that the barrel is turning freely.

    Home Page

  3. #3
    Silver Member
    Join Date
    Sep 2012
    Pasquali 993 w/FEL, Economy2414 w/FEL

    Default Re: Pasquali tractor with post hole digger?

    A Post-hole digger works EXCELLENT on a Pasquali, the articulation allows hole to be dug with near pinpoint accuracy, (you can pivot left & right without moving). Change the lift location on the lifting-arms to the inside hole & gain several more inches of up stroke. I used a PHD on my 993 in a thickly-wooded area to create hog-pen, was able to fit in areas that a conventional tractor can't fit.

Similar Threads

  1. Post Hole Digger - if stuck
    By The Gardener in forum Owning/Operating
    Replies: 75
    Last Post: 05-31-2009, 01:30 AM
  2. Post hole digger augers
    By Carver_Bill in forum Massey Ferguson Owning/Operating
    Replies: 3
    Last Post: 05-18-2007, 02:34 PM
  3. Posthole Digger Trouble with post hole digger
    By jester7891 in forum Attachments
    Replies: 7
    Last Post: 05-06-2007, 10:34 PM
  4. Engaging a post hole digger on a TC29D
    By Mosey in forum New Holland Owning/Operating
    Replies: 5
    Last Post: 05-08-2002, 05:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.