Results 11 to 13 of 13
-
01-04-2013, 03:51 PM #11New Member
- Join Date
- Dec 2012
- Posts
- 5
- Location
- scotland
- Tractor
- fordson super dexta
Re: Fordson dexta
tractor was left outside in all weather for many years, a mate of mine found it and took me to see it. Turned out it was owned by my mates brother who lived 90 miles away.Anyway it was a proverbial pile of scrap, all tinwork was rotten apart from the bonnet, engine was seized up. However decided it was too far gone to take a chance on and returned home.For days it bugged me as the tractor, a fordson super dexta was exactly what I had been looking for. As I already owned a Ferguson TED20 petrol/tvo which I had already restored, I was in no hurry to make a decision. A week later, I gave in and called the man who said £800 would be the cost so I hitched up the trailer and went and collected. On arriving home, I found the engine, gearbox and rear end were all full of water,obviously the battery was goosed,the rear tyres were bulging, steering had 6 inches of play, steering wheel was even rotten. So you can see it was going to be a long hard expensive experience. After two years and £2800 pounds more with more than a little help from friends the tractor was more or less restored it is a fantastic little tractor. Oh by the way I also found a cab for it which is on but needs a bit of work. Some time shortly I will send photos in. Brian Cox, Perth Scotland
-
01-04-2013, 05:38 PM #12Veteran Member
- Join Date
- Nov 2011
- Posts
- 1,091
- Location
- Near Winnipeg, Mb, Canada
- Tractor
- John Deere 2305, 2320,Z465
Re: Fordson dexta
Brian, welcome a board!
We have a little saying around here. It didn't happen unless you have pictures!!
Nice to here of the ol'girl getting new life!!Carefull what you aim for, Aim for nothing and you will achieve it with amazing accuracy.
-
01-07-2013, 02:14 PM #13New Member
- Join Date
- Dec 2012
- Posts
- 5
- Location
- scotland
- Tractor
- fordson super dexta
Re: Fordson dexta
forgot to say, clutch was seized and was told to start it in gear and drive around depressing the pedal up and down to free clutch but all this did was shred the clutch plate so it was a split job and new plate which I wanted like a hole in the head ............bah!
Similar Threads
-
Fordson dexta
By freehold farm in forum General Vintage TractorsReplies: 6Last Post: 10-08-2012, 02:34 PM -
Fordson Super Dexta Parts
By fireman4074 in forum Ford Vintage TractorsReplies: 7Last Post: 03-15-2012, 08:25 PM -
Fordson Super Dexta
By fireman4074 in forum Ford Vintage TractorsReplies: 7Last Post: 09-21-2011, 11:05 AM -
Availability of Fordson Dexta Parts
By twtrout in forum New Holland Buying/PricingReplies: 3Last Post: 08-17-2009, 11:43 AM -
Advice on a Fordson Dexta with Perkins P3
By twtrout in forum General Vintage TractorsReplies: 3Last Post: 03-23-2009, 07:24 AM


Reply With Quote
