Results 1 to 8 of 8
  1. #1
    New Member
    Join Date
    Mar 2013
    Posts
    4
    Location
    St. Catharines, ontario
    Tractor
    Belarus 5370, 5470s

    Default Belarus 5370 clutch

    i'm new to this forum. My 5370 Belarus has 2000 hrs. the clutch will not engage. Working fine all day hauling manure and suddenly clutch would not engage. I couldn't pull it out of gear and had to shut it down to stop it.
    It has a 5 X 10 plate under the throw out bearing. I'm going back out to see what i can see from that angle.
    Any ideas?
    Thanks

  2. #2
    Silver Member BelarusBulldog's Avatar
    Join Date
    Aug 2011
    Posts
    126
    Location
    The ROCK! NL. Canada
    Tractor
    Belarus 562 / Bobcat CT122 / Kubota BX1860 / Honda HT4213

    Default Re: Belarus 5370 clutch

    Have someone move the clutch pedal while you check the linkage. Might have a pin or key come loose.
    Last edited by BelarusBulldog; 03-09-2013 at 05:45 PM.
    Plowing, it's snow much fun!

  3. #3
    New Member
    Join Date
    Mar 2013
    Posts
    4
    Location
    St. Catharines, ontario
    Tractor
    Belarus 5370, 5470s

    Default Re: Belarus 5370 clutch

    I looked in while the clutch was moved. Bearing slides well. One of the release levers isn't returning when the clutch is released. I'm afraid that I'm going to have to split the tractor to get at things.

  4. #4
    New Member
    Join Date
    Mar 2013
    Posts
    4
    Location
    St. Catharines, ontario
    Tractor
    Belarus 5370, 5470s

    Default Re: Belarus 5370 clutch

    Is anyone familiar with that clutch assembly? Should I be able to find a missing pin from the service hole, or is it a guaranteed split?
    Thanks.

  5. #5
    New Member
    Join Date
    Mar 2013
    Posts
    5
    Location
    soo,mi
    Tractor
    belarus

    Default Re: Belarus 5370 clutch

    The pressure plate has adjustable "fingers". When the clutch facing wears enough to allow slippage, through that tiny inspection port you mentioned, loosen the lock nut and turn the flat blade adjustment bolt. Then turn the flywheel and adjust the next one. I think there are 5 or 6 fingers.
    It troubles me that the problem was so instant. Do I understand that you cannot get the tractor to stop pulling, even with the clutch pedal pushed down? I've had mine stick from time to time, after sitting a long while. Clutch pedal adjustment is tricky, so I hesitate to advise you to start monkeying around. But try extending the clutch arm to get a bit of extra pressure on releasing the clutch. I think there might be a grease zerk near where the throw out rod enters the case, ever grease it?

  6. #6
    Platinum Member
    Join Date
    Oct 2010
    Posts
    687
    Location
    Near Peace river -Alberta
    Tractor
    ASV 4810

    Default Re: Belarus 5370 clutch

    Me thinks you'll have to split the tractor.
    If one clutch finger stays behind there is something not right there,..a pin slipped out or maybe the lever broke
    It can also be that the finger return spring broke but that should not cause the clutch not to operate.
    3 cockshutt 1855,1 cockshutt 1800.
    Belarus 800 and 925 .AC 940 whl ldr.Waldon 500 whl ldr.
    ASV 4810 tracksteer.
    4 GMC 2500 6.5/6.2 diesel trucks

  7. #7
    New Member
    Join Date
    Mar 2013
    Posts
    4
    Location
    St. Catharines, ontario
    Tractor
    Belarus 5370, 5470s

    Default Re: Belarus 5370 clutch

    Thanks. I'll split it when the weather gets warm. While it is apart i'll replace the slutch and throw out bearing. Do you know if the new clutch assembly comes set -up or do i need do make adjustments when i put back together?

  8. #8
    Platinum Member
    Join Date
    Oct 2010
    Posts
    687
    Location
    Near Peace river -Alberta
    Tractor
    ASV 4810

    Default Re: Belarus 5370 clutch

    It prob depends on the model.Most clutches are factory set.
    Your Belarus dealer should know.
    3 cockshutt 1855,1 cockshutt 1800.
    Belarus 800 and 925 .AC 940 whl ldr.Waldon 500 whl ldr.
    ASV 4810 tracksteer.
    4 GMC 2500 6.5/6.2 diesel trucks

Similar Threads

  1. Belarus
    By globaldave in forum Parts/Repairs
    Replies: 0
    Last Post: 08-22-2012, 07:23 PM
  2. Belarus
    By globaldave in forum Wanted Ads
    Replies: 0
    Last Post: 08-22-2012, 07:16 PM
  3. Belarus
    By Jason_Amanda in forum Parts/Repairs
    Replies: 2
    Last Post: 11-16-2006, 08:23 AM
  4. Belarus 570 Clutch slipping??
    By jimb111 in forum Parts/Repairs
    Replies: 4
    Last Post: 08-31-2004, 09:50 PM
  5. Belarus help
    By Black85L98 in forum All Other Brands
    Replies: 2
    Last Post: 08-09-2004, 11:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.