mpilihp
Silver Member
Ive had issues on and off with the clutch on my 988 Pasquali, two problems really. The first is using it sometimes my foot will slip off of it in the most inconvenient times and the second is with breaking clutch cables.
The first issue is because the pedal pushes straight down and if your boot is wet or muddy the force needed to keep it down can cause your foot to slip off of it forwards causing you to learch and possibly into something. So I made a inclined serrated add-on that gives my foot something to push forward against and it is very grippy. Here are some pictures of this fix:
The second issue is the clutch cable keeps breaking once or twice a year. I've been making it from cable stock from Tractor supply but really don't want to keep doing that. Ive found that the cable sheave where it goes into the adjuster is at an angle and the metal end is scraping against the cable. So using a couple pieces of PEX tubing I made a brace to hold it straight up and down.
Hope this can help someone else!
~ Phil
The first issue is because the pedal pushes straight down and if your boot is wet or muddy the force needed to keep it down can cause your foot to slip off of it forwards causing you to learch and possibly into something. So I made a inclined serrated add-on that gives my foot something to push forward against and it is very grippy. Here are some pictures of this fix:
The second issue is the clutch cable keeps breaking once or twice a year. I've been making it from cable stock from Tractor supply but really don't want to keep doing that. Ive found that the cable sheave where it goes into the adjuster is at an angle and the metal end is scraping against the cable. So using a couple pieces of PEX tubing I made a brace to hold it straight up and down.
Hope this can help someone else!
~ Phil