Results 1 to 9 of 9
  1. #1
    Veteran Member Luremaker's Avatar
    Join Date
    Aug 2004
    Posts
    1,250
    Location
    Ontario
    Tractor
    Kubota L3130HST & NH TC18

    Default Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Anyone have one of these slip clutches from Agri Supply. I am looking for one for my rotary cutter and these seem to be the most economical priced slip clutches at $64.95. My RC is a 72" model not sure what the rating of the gearbox is but looks like it should work for my RC.

    http://www.agrisupplyco.com/Graphics/31951.jpg


    ASC # 31951

  2. #2
    Super Member
    Join Date
    Feb 2006
    Posts
    8,029
    Location
    VA
    Tractor
    JD2010, Kubota3450,2550, Mahindra 7520 w FEL w Skid Steer QC w/Tilt Tatch, & BH, BX1500

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Looks exactly like the one on the KK Rototiller we use on a L3450. It gives no trouble.
    larry

  3. #3
    Platinum Member Bill Barrett's Avatar
    Join Date
    Jul 2006
    Posts
    671
    Location
    midwest
    Tractor
    Kubota L3130, Satoh G650, Case 580, Case 446

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    I have had one on my 5' rotary mower for 3 years, no problems.

  4. #4
    Gold Member
    Join Date
    Aug 2005
    Posts
    368
    Location
    The Real Maine
    Tractor
    JD3520

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Hi luremaker,

    Have one on my logging winch & it works fine--it is the same as they sent with the King Kutter tiller...

    Only complaint would be attachment (2 bolts instead of springed pin or ball bearings)... adds that much more labor to the periodic "slipping" clutches need if regular work isn't causing slippage/beginning of season plate polishing...
    browns40




  5. #5
    Veteran Member Luremaker's Avatar
    Join Date
    Aug 2004
    Posts
    1,250
    Location
    Ontario
    Tractor
    Kubota L3130HST & NH TC18

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Thanks guys. I'll order one in the morning.
    Steve

  6. #6
    Veteran Member
    Approved Advertiser
    HayDR's Avatar
    Join Date
    Oct 2002
    Posts
    1,864
    Location
    Johnson City, TN
    Tractor
    JD 2040,2240, 2355, 2755, 4055

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Quote Originally Posted by Luremaker
    Thanks guys. I'll order one in the morning.
    Steve
    The manufacturer is EuroCardan. They are OEM suppliers to King Kutter, LandPride, and hundreds of other manufacturers. You will not have a problem if you get the proper shaft. Make sure you use the same series size shaft or larger for the replacement shaft. Shafts are not just shafts, you need to match the HP requirements for the implement with the replacement shaft. You also need to match the OEM specifications for the safety device or clutch. You can down load an identification chart for PTO's on this link.
    PTO Shaft

  7. #7
    Veteran Member Luremaker's Avatar
    Join Date
    Aug 2004
    Posts
    1,250
    Location
    Ontario
    Tractor
    Kubota L3130HST & NH TC18

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Quote Originally Posted by CCI
    The manufacturer is EuroCardan. They are OEM suppliers to King Kutter, LandPride, and hundreds of other manufacturers. You will not have a problem if you get the proper shaft. Make sure you use the same series size shaft or larger for the replacement shaft. Shafts are not just shafts, you need to match the HP requirements for the implement with the replacement shaft. You also need to match the OEM specifications for the safety device or clutch. You can down load an identification chart for PTO's on this link.
    PTO Shaft
    Thanks for the info CCI, I am using the shaft that came with my RC. I have lots of rocks here and decided I should add a slip clutch. So I am looking for a slip clutch by itself. I thought any 1-3/8" splined slip clutch would work. I have never broke a shear pin but thought the slip clutch would be added protection.

  8. #8
    Veteran Member
    Approved Advertiser
    HayDR's Avatar
    Join Date
    Oct 2002
    Posts
    1,864
    Location
    Johnson City, TN
    Tractor
    JD 2040,2240, 2355, 2755, 4055

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Quote Originally Posted by Luremaker
    Thanks for the info CCI, I am using the shaft that came with my RC. I have lots of rocks here and decided I should add a slip clutch. So I am looking for a slip clutch by itself. I thought any 1-3/8" splined slip clutch would work. I have never broke a shear pin but thought the slip clutch would be added protection.
    To use your current PTO shaft you will need to purchase the 1 3/8" round bore male to 1 3/8" female round bore clutch if you have a shear pin.

  9. #9
    Veteran Member Luremaker's Avatar
    Join Date
    Aug 2004
    Posts
    1,250
    Location
    Ontario
    Tractor
    Kubota L3130HST & NH TC18

    Default Re: Cheap PTO Slip Clutch from Agri Supply - are the any good?

    Quote Originally Posted by CCI
    To use your current PTO shaft you will need to purchase the 1 3/8" round bore male to 1 3/8" female round bore clutch if you have a shear pin.
    You are right! After reading your post I checked my RC and it has a round bore male with a hole for the shear pin. Thanks again. BTW does CCM ship to Canada?

    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.