Grapple Ordered a Millonzi 48" Grapple for my B7500

[DonT-B7500]

Placed the order on Friday, should be about 2wk ship time. Here's my set up, I acquired a Fasse diverter valve with another implement that was originally hooked to a JD. I used the bracket it came with and welded it to my loader arm, I did it this way so I would still only have 4 QCs when ever I remove the loader. I also modified the torque tube tubing hold down into a bulkhead for mounting the grapple QCs. To power the diverter valve I got a Bosch relay (readily available on EBay for $5.00), ran an inline fuse directly from the ignition switch to an illuminated rocker switch on the dash, I then ran my power from the relay to the loader using a power cord from an old computer, I like these because they are hooded and weather protected. I also ran wires for a second switch which will be a momentary pushbutton on the loader joystick. I found a B&M 80658 - B&M Shifter Knobs - ''T'' Handle Style that will work nice. Cant wait for delivery.

 

[RedRocker]

I like mine.

 

[gmercer]

Did you purchase directly from the Millonzi by phone? I have sent a PM to Joe@MI (as suggested by others in the forum), but no response yet.

 

[DonT-B7500]

Talked directly to John Kennedy, Main Office: +1 800 995 6552, also communicated by Email: jkennedy@miproductsgroup.com , he has been very helpful and answered all my questions. Tell him I gave you his contact info.

 

[gmercer]

Talked directly to John Kennedy, Main Office: +1 800 995 6552, also communicated by Email: jkennedy@miproductsgroup.com , he has been very helpful and answered all my questions. Tell him I gave you his contact info.

Will do. Thanks Don. Good luck with your grapple.

 

[mscheer772]

I don't thinf joe is @Millonzi anymore

-Mike-

 

[gmercer]

I don't thinf joe is @Millonzi anymore

-Mike-

Maybe not. I contacted John Kennedy (referenced above by DonT), and he was able to help me. Outstanding customer service so far in placing my order. These folks are very courteous and try to help in every way.

 

[KB4330]

Good call. I dealt with John as well and he is very nice to work with. I'ts kind of interesting to see someone with your tractor get the same size of grapple I did. Based on the work I do I can't imagine needing anything more. You will love it.

 

[IslandTractor]

Good call. I dealt with John as well and he is very nice to work with. I'ts kind of interesting to see someone with your tractor get the same size of grapple I did. Based on the work I do I can't imagine needing anything more. You will love it.

I've had my Millonzi 48 on both a 21hp tractor (Kioti CK20) and a 41hp (DK40se). Works just as well on either. I also cannot understand why anyone would need a bigger grapple for a CUT.